ALUMINIUM PROFILE FOR SLIDING DOORS JYGM128

JYGM128 is a series of aluminium profile for sliding door. This model has a reasonable design, nice appearance, moderate thickness, thermal insulation function and low material cost. It is designed to be a home-use improvement product.

From casting to extrusion,and then to surface and deep processing ,the aluminium profile is one-stop produced in our factory.

Our products are certified by ISO9001 quality management system. The technical indexes including tensile,hardness,anodized film,gloss of electrophoresis film are all above the national standard of GB/T5237-2008.We also won the reputation of “Energy Conservation Products” and“Guangdong Top brand”.

The aluminium profile of JINYANG not only has superior quality, but also durable in use. What’s more, we provide various of surface treatment including polishing, sandblasting,anodizing, electrophoresis, powder coating and wood grain transfer printing.

More Details

Place of Origin:Guangdong,China

Brand Name:JINYANG

Grade:6000 Series

Alloy Or Not:Is Alloy

Material :Alloy 6063

Temper:T3-T8

Surface Treatment:Mill finish,sandblasting,powder coating,anodizing,electrophoresis,wooden grain transfer printing

Length:Customized

Quality Standard:GB 5237-2008

Payment Term:T/T, L/C, or consulting

Certification:CQM,IQ Net

Precision:+-0.15mm

Application:Construction & Decoration

Packaging Option

Sticker film for each profile

Shrink PE film outside each bundle of profile

Kraft Paper for each bundle of profile

EPE for each bundle of profile

Port

Foshan

Guangzhou

Shenzhen

aluminium ingot & alloy→melting and casting→homogenizing→extrusion→aging→surface treatment→deep processing(if necessary)→checkout→packing→finished product

Productivity & Equipment

The comprehensive production capacity exceeds 30,000 tons

19 extrusion production lines from 600T to 2500T

2 melting&casting production lines

6 anodizing production lines

4 electrophoresis production lines

1 spraying production lines

3 thermal insulation production lines

1 wood grain production line

2 deep processing production lines for thermal barrier

Aluminium sliding door profiles are the fundamental building block for aluminium sliding doors. Sliding doors refer to a single door which is pulled and pushed open, with no hinges to operate the mechanism. The mechanism used for sliding doors is typically an all-moving piece, with springs that enable the door to move in an efficient manner when opening and closing.

With the development of new technologies and the diversification of decorating methods, aluminium sliding door profiles, from simple sheet metal sliding doors, to aluminium composite profiles, from traditional folding doors, to gliding doors, to patio doors, moulded profiles, through to fully insulated, weather-proof, energy-efficient sliding glass profiles - the range of aluminium sliding door profiles is enormous.

Aluminium profiles for windows and doos are another important factors in the design of aluminium sliding door profiles because the window profile incorporates the hinges. Doors are formed at the manufacturing stage by forming the moulds in a dedicated production line using high-pressure temperature fluctuations. The moulds are cooled during their travel down the production lines to ensure the best possible results and that the moulds are free from any damage or warping while they travel down the lines.

As the moulds are formed, special equipment helps them to travel smoothly, but at a constant speed so as to create a consistent finish, with the special equipment using robotic equipment, which provides for a smooth glide on the production lines. This enables each and every mould to be unique and to provide an accurate and consistent end product.

Once the moulds are formed, the production process begins with the application of the complex multi-layered coating of aluminium oxide, polyimide binder and high-quality resins onto the moulds. These coatings are resistant to water, grease and corrosion.

Once the aluminium oxide, polyimide binder and high quality resin have been applied onto the moulds, they are slowly pulled out using mechanical shears and then pulled back into the original mould to be created into the final aluminium sliding door profiles. This requires a great deal of precision and speed during the manufacturing phase. The result is an individual and consistent cut to each and every mould, ensuring each and every piece has been created equally.